RICOH GR V 3.00
Thank you for using GR digital camera.
RICOH IMAGING COMPANY, LTD. wishes to announce the release of Firmware Update Software Version 3.00 for GR.
Firmware in this document is the software that runs inside digital cameras.
Add the following enhanced features （V3.00）
Added [Slight] on [Effect] of [Shooting] menu.
Added [AFL Focus Setting] on [Key Custom Options] menu.
Added [Ambient Brightness] on [Setup] menu.
Added [Folder Name Setting] on [Setup] menu.
[Change Shutter Speed] will be set in increments of 1/3 steps when [ISO Step Setting] is set to [1/3EV].
Added [Aspect Ratio] to the parameters of [RAW Development] on [Playback] menu.
＊For more details click here
Add the following enhanced features （V2.03）
*Numbers in the () indicate reference page on the operating manual.
Shutter speed at the maximum aperture can be set up to 1/2500 seconds.
Changed the order of the icons for No.21 to No.25 in the shooting display (p.18).
<Switching from Playback Mode to Shooting Mode> (p.28)
Pressing the shutter release button fully after starting up the camera in playback mode can switch to shooting mode.
Added 47mm crop (in 35mm format).
Former [Crop to 35mm] has changed into [Crop]. It has three options: [OFF], [35mm] and [47mm].
When [35mm] or [47mm] is selected, [35mm] or [47mm] appears instead of [CROP] on the shooting screen (p.18).
When set to [47mm], the angle of view is equivalent to 47mm (in 35mm format).
When set to [47mm], [L] or [M] cannot be selected in [Format/Size] of the [Picture Format], and RAW files will be recorded as [S]
If [28/35mm] or [28/35/47mm] is registered with [Set Fn1 Button], [Set Fn2 Button] or [Effect Button Setting] of the [Key Custom Options] menu, the angle of view can be changed each time pressing the correspondent button（p.107）
<P Mode Selection>
Added the program diagram in [Max Aperture Prior.].
Newly added [P Mode Selection] (can be set only in P mode and M mode) has two options: [Normal] and [Max Aperture Prior.] (Maximum Aperture Priority).
When [Max Aperture Prior.] is set in P mode, [PA] appears on the shooting screen.
When [Program] is selected in [One Press M Mode] of the [Key Custom Options] menu (p.42), the aperture value and shutter speed are adjusted according to the [P Mode Selection] setting you set.
【Key Custom Options Menu】
<Shutter Button Confirmation>
Added [Shutter Button Confirmation].
When set to [On], pressing the shutter release button halfway can save the settings in ADJ. mode or in exposure compensation.
<Eye-Fi RAW Transfer>
Added [Eye-Fi RAW Transfer] (available only when using Eye-Fi cards which support RAW files).
It has two options: [Allow] and [Deny]. When [Deny] is selected at [Eye-Fi transfer Selected Images], RAW files are not transferred.
<Displays the Number of Remaining Images to be Transferred>(p.97)
When transfer images using [Eye-Fi transfer Selected Images], the number of remaining images to be transferred can be displayed on the playback screen.
<File Name of Transferred Images>(p.97)
Image files with a folder number of over 200 can also be transferred at [Eye-Fi transfer Selected Images].
The file names of transferred images are below:
Last two digits of the folder name + last six digits of the file name
Changes to V2.03
Exif tag [Manufacturer of image input equipment] change to RICOH IMAGING COMPANY, LTD.
When focus is set with [Multiple AF], AFL is spot AF
Improved image quality for dark section when developing Dynamic Range Compensation [Strong] setting by RAW Development function of GR camera for RAW file that captured image with the Dynamic Range Compensation [Strong].
When LCD Confirmation time is set [HOLD] and taking image with [Custom Self-Timer], automatically taking next image with setting Shooting interval.
Improved image quality when developing RAW file with combining brightness correction and limb darkening correction.
Standard icon is displayed when taking image with setting Image Setting to Standard and playback with detail information display mode.
Improved color reproduction of white balance [Multi-P AUTO] for some scenes.
Improved ColorMatrix for setting of DNG file.
Improved image quality for taking image with ISO 1600 to 3200 and Noise Reduction setting [Weak],[Medium],[Strong] and [Auto].
Improved stability when selecting transfer by Eye-Fi.
Only GR users are permitted to download the firmware update
Firmware Update Software for GR
Name Firmware Update Software for GR
Registered name rg1_v003.zip (zip type file 7,689 Kbytes)
Applied product GR
Updated firmware file Zip type (For Windows/Macintosh)
Release date 2014/01/23
Copy right RICOH IMAGING COMPANY, LTD.
How to check version
 Turn ON the camera.
 Press MENU/OK button and press Fn1 button.
 Press WB button to display [Set-up ] menu screen.
 Press flash button and Select [Confirm Firmware Version].
 Press flash button.
The firmware version for camera is displayed on the [Confirm Firm Version] screen.
Preparation of update
Blank, formatted SD card (16MB or more)
If you are copying the firmware update file to the SD card by connecting the camera directly to your computer.
SD card reader or a computer with a SD card slot.
If you are copying the firmware update file to the SD card using a memory card reader / writer.
Fully charged battery
*Be sure to use fully charged battery
If the camera turns off during updating due to lack of battery power, the camera will become inoperable. If this happens, a charge will be made for repairs even if within the warranty period.
Download the updated firmware file
For Windows/Macintosh : 1391548-51_GR Firmware v3.00, zip type
 ] Provide a formatted SD memory card for the update software.
The download file is self-extracting. The following file is extracted.
rg1_v003.frm: This is the updated firmware
Copy the above Firmware file [rg1_v003.frm] to the root directory in the SD card.
If your computer does not have a card slot, you can copy the firmware update file by inserting the SD card into your camera and then connecting the camera directly to your computer.
 Insert the battery into the camera and confirm the battery is full by battery level indicator then turn the camera off.
 Insert the update SD card (prepared in step 1) into the camera and close card cover.
 Turn the camera power on.
 Press MENU button and press Fn1 button.
 Press WB button to display [Set-up] menu screen.
 Press flash button and Select [Confirm Firmware Version].
 Press flash button
Current version and new version will be displayed.
*If firmware file is not saved to SD card correctly, this screen will not be displayed.
 Select [Yes] and press MENU/OK button.
*The firmware update will start.
*Do not turn OFF the camera while updating.
 When update is completed, “Firmware update complete” will be displayed
 Press MENU/OK button then remove the SD card from camera.
*Confirm the version of firmware with above [How to check version].
When updating is finished, the update SD card still contains the Firmware file.
If you want to use this card to take pictures, format the card by the camera to delete firmware file first.
This software may only be used by users who own the GR
This software is covered by a software license agreement. Please read the software license agreement before downloading the software.
You will have agreed with this software license agreement when the download starts.
Firmware Update Software for GR Software License Agreement
The customer (hereinafter "the user") shall verify the following items below related to the use of the licensed software supplied to the user by RICOH IMAGING COMPANY, LTD. The download starts when you press "I agree. Start download." on this software license agreement.
Definition of terms
Licensed software: "Licensed software" means the captioned program in a format that the user can download from the RICOH IMAGING COMPANY, LTD website or from a site empowered by RICOH IMAGING COMPANY, LTD.
Use : "Use" means the user downloading and retrieving the licensed software from the RICOH IMAGING COMPANY, LTD website or from a site empowered by RICOH IMAGING COMPANY, LTD .
Designated machine: "Designated machine" means the single computer system set up in order for the user to use the licensed software.
Reproduction: "Reproduction" means reproducing the licensed software on a storage device in the same format as the user downloaded or a different format.
Modification: "Modification" means performing alternations or making additions to the licensed software, or creating separate software that makes use of all or a portion of the licensed software.
Grant of license
RICOH IMAGING COMPANY, LTD grants a non-exclusive license to the user on the condition that the user uses the licensed software in accordance with the terms and conditions of this software license agreement. The user may only use the licensed software on the designated machine.
Reproduction of the licensed software. The user shall not reproduce the licensed software for purposes other than to save and backup the licensed software intended for use on the designated machine. The user shall not modify or reverse engineer the licensed software for any reason.
Property rights and copyright
The copyright and other property rights for the licensed software and for reproductions of the licensed software belong to RICOH IMAGING COMPANY, LTD regardless of any reason. The user shall not remove the copyright notations from the licensed software or from reproductions of the licensed software.
Grant of sublicense
The user shall not transfer possession of the licensed software or reproductions of the licensed software to third parties, and the user shall not transfer the license nor grant a sublicense of the licensed software to third parties.
This software license agreement is effective on the day the user starts using the licensed software and is valid until the time the user stops use. Provided that, when the user has violated any portion of this software license agreement, RICOH IMAGING COMPANY, LTD may revoke the license granted to the user for the licensed software and terminate the software license agreement.
Obligations after termination
After the software license agreement is terminated, the user, at the user's own responsibility, shall dispose of the licensed software after rendering it into a state where it cannot be used by third parties, and dispose of reproductions and modifications of the licensed software, and all materials related to the licensed software.
Guarantee of the licensed software
RICOH IMAGING COMPANY, LTD shall not guarantee that the licensed software is suitable for the user's designated purposes, or that the licensed software is useful, or that this licensed software is free from defects, nor shall RICOH IMAGING COMPANY, LTD make any other guarantees related to the licensed software.
Exporting the licensed software
The user shall not directly or indirectly export all or a portion of the licensed software without obtaining the necessary permission from the Government of Japan or the governments of the relevant countries.
RICOH IMAGING COMPANY, LTD 's responsibilities
RICOH IMAGING COMPANY, LTD A assumes no responsibility under any circumstance for direct or indirect damage or damage from ripple effects that occurs from using the licensed software, for damage to data, programs, or other intangible properties, or for loss of usage benefits and lost profits.
Responsibility for employees
The user assumes all responsibility that the user's employees (those employees that the user has a responsibility to manage or monitor based on an employment relationship) fully comprehend the obligations set forth in this software license agreement and faithfully fulfill those obligations.